NEC DTR-IR-2 - Manual (Page 13)

G e t t i n g S t a r t e d [ 9 ]
Connecting the Charger
1 Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall
outlet.
2 Set the charger on a desk or tabletop, and place the handset in the charger
with the keypad facing forward. (See
“B. Install the Rechargeable Battery Pack
into the Handset” on page 6 .)
Register the Handset
Handsets supplied with the phone are registered to the base by the factory.
When charged, pre-registered handsets display a handset ID number. Handsets
that have not been registered display
P la ce ha n ds et on m ai n b a se to r eg is te r .
When you register a handset to the base, the handset ID will be assigned.
1 Before registering the handset, the battery pack MUST be charged for 15~20 hours.
2 Place the handset in the main base unit to begin registration.
3 While the handset is registering, H a n d s e t R e g i s t e r i n g will appear in the LCD. When Re gi st ra t i o n
Co mple te is displayed, the handset has been registered to the base. If Registration Failed appears, please
try these steps again.
Charge the handset battery pack for at least 15~20 hours before
using your new cordless telephone for the first time. note
2 N C E G J C P F U G V
Q P O C K P D C U G
V Q T G I K U V G T
/76' %9&:
The handset can be registered when the main base is in standby
mode.
note