Nikon WIRELESS KEYPAD KIT HMSC7075 - Manual (Page 3)

3
Package Contents
D A T A
K E Y
A W A Y
H O M E S T A T U S
Installation Overview
To install your Keypad module:
1
Choose an appropriate location for the Keypad module as described in Installation Hints.
2
Install batteries or plug the AC adapter into the wall and the module.
3
Register the module with your Wireless System Controller using a process called discovery. Refer to your
Wireless System Controller documentation for instructions on how to discover your Wireless Keypad.
4
Touch your Keypad Key(s) to the Kepypad port and click on Settings/Key Management in the Motorola
homesight™ software to see that the key has been registered.
5
Mount the module, using either the tabletop base, or by following the instructions for wall mounting.
DIS COV E RY
Installation Hints
The Motorola Wireless Keypad module is constructed of UV-resistant ABS plastic.
Please consider the following points when mounting the module:
•
If installing the Wireless Keypad outside, it should be shielded from the elements, such as underneath a porch
roof. Do not install the module where it is subjected directly to the elements.
•
Typically, the module's wireless reception is good up to 60–200 feet from the Wireless System Controller
depending on indoor or outdoor use and the number of obstacles. These can include metal framing, thick walls,
and other wireless devices operating at 418 MHz. It is recommended that different positions be tried for optimal
results.
•
If battery operation is preferred, pry off the back cover by lifting the cover at the bottom area where the AC power
supply would be connected. Lift and slide the cover down to remove it, and install the batteries.
Keypad
Module (2)
Keypad
Keys Tabletop
Mounting
Base
Hardware
Mounting
Kit
2 AA
Batteries
12V Power
Adapter
Discovery
Tool
Back View
Discovery
Button