NAD S300 User Manual

Page 9

background image

GB

9

TROUBLESHOOTING

NO SOUND

• Power AC Mains cable unplugged or

power not switched on

• TAPE MONITOR is selected

• Mute on

• Internal fuse blown

• Check if AC Mains cable is plugged in and

power switched on

• De-select TAPE MONITOR mode

• Switch off Mute

• Consult dealer

Problem

Cause

Solution

NO SOUND IN ONE CHANNEL

• Speaker not properly connected or

damaged

• Input lead disconnected or damaged

• Check connections and speakers

• Check leads and connections

WEAK BASS / POOR STEREO IMAGE

• Speakers wired out of phase

• Check connections to all speakers

in the system

REMOTE CONTROL HANDSET NOT

WORKING

• Batteries flat, or incorrectly inserted.

• IR transmitter or receiver windows

obstructed

• Check or replace batteries

• Remove obstruction