Pioneer LASERDISC/COMPACT DISC PLAYER CLD-V5000 - Manual (Page 59)

48) REGISTER E SET LD/CD
Function: Changes the current setting of Register E. (Repeat)
Format: Integer R E
Explanation: When power is turned ON, and SW 4 is set ON/DOWN, the Repeat
Function of Register E is set to 1/ON. When Switch 5 is ON/DOWN
the Both Sides Function of Register E is set to 1/ON. Register E
sets the Repeat Mode, as follows: To set the Function ON, input the
value indicated by the Integer. To set several, add up the Integers.
Execution: * Initial value 0
2 R E
R
* Repeat is OFF, Both-side playback is ON.
NOTE: When Repeat Mode is changed using the REPEAT key of the Remote
Control Unit or Front Panel, the contents of Register E change as follows:
Also: The Repeat of Register C and that of Register E are always linked. Each
changes according to any change in the contents of the other.
CLD-V5000 Level III User’s Manual
TP 121 v. 1.0 • 1/96
3-43
CLD-V5000 Level III • Chapter Three
Integer Function 1 0
1 Repeat ON OFF
2 Both Sides ON OFF
4 (Not Used)
8 (Not Used)
16 (Not Used)
32 (Not Used)
64 (Not Used)
128 (Not Used)
Figure 3-V
Repeat Mode Repeat Both Sides
Stops after playing back one side OFF OFF
Stops after playing back both sides OFF ON
One-Side Repeat ON OFF
Both-Sides Repeat ON ON
Figure 3-W
Screen Display RegisterE Contents
All Repeat 00000011
Side Repeat 00000001
Chapter Repeat 00000001
Auto Return 000000X0