Software options – Powercom 625A User Manual
Page 12
7. Software options
__________________________________________________________
____
7.1 UPSMON Software
The UPSMON software is applied standard RS-232 interface to perform
monitoring functions, and then provides an orderly shutdown of a computer in
the event of power failure. Moreover, UPSMON displays all the diagnostic
symptoms on monitor, such as Voltage, Frequency, Battery level and so on..
The software is available for DOS, Windows 3.1x, Windows 95 & Windows NT
V3.5 or later.
7.2 Interface Kits
A series of interface kits is available for operation systems that provide UPS
monitoring. Each interface kit includes the special interface cable required to
convert status signals from the UPS into signals which individual operating
system recognize. The interface cable at UPS side must be connected to
REMOTE PORT , at computer side can be either COM 1 or COM 2. The other
installation instructions and powerful features please refer to READ.ME file.
Caution: Use only factory supplied or authorized UPS monitoring cable !