Controls and displays 04, Display – Pioneer 7.1 VSX-AX2AV-S User Manual
Page 23
Controls and displays
04
23
En
Display
1
SIGNAL
indicators
Light to indicate the currently selected input signal.
AUTO
lights when the receiver is set to select the input
signal automatically (page 28).
2
Program format indicators
These change according to which channels are active in
digital sources.
L
– Left front channel
C
– Center channel
R
– Right front channel
SL
– Left surround channel
S
– Surround channel (mono)
SR
– Right surround channel
SBL
– Left surround back channel
SB
– Surround back channel (mono)
SBR
– Right surround back channel
LFE
– Low frequency effects channel (the
((( )))
indicators light when
an LFE signal is being input)
3
Digital format indicators
Light when a signal encoded in the corresponding format
is detected (
DSD
PCM
lights during DSD (Digital
Stream Direct) to PCM conversion with SACDs).
4
OVER
/
ATT
OVER
lights to indicate that the level of an analog source
is too high.
ATT
lights when you use the attenuator
(
ANALOG ATT
) to reduce it.
5
MULTI-ROOM
Lights when the multi-room feature is active (page 54).
6
VIDEO CONV.
Lights when digital video conversion is enabled
(page 63).
7
V.SB
Lights during Virtual surround back processing
(page 29)
.
8
Sound processing indicators
Light according to the active AV parameter(s) (page 63).
9
TUNER
indicators
TUNED
– Lights when a broadcast is being received.
STEREO
– Lights when a stereo FM broadcast is
being received in auto stereo mode.
MONO
– Lights when the mono mode is set using
the
MPX
button.
10 EON
/
RDS indicators
EON
– Lights when the EON mode is set (flashes
during EON reception). The
indicator lights when
the current station carries the EON service (page 32).
RDS
– Lights when an RDS broadcast is received
(page 31).
11 Master volume level
Shows the overall volume level.
–80dB
indicates the
minimum level, and
+12dB
indicates the maximum level.
12 Input source indicators
Light to indicate the input source you have selected.
13
STREAM DIRECT
Lights when Direct / Pure Direct is selected (page 28).
14 Speaker indicators
Indicate the current speaker system,
A
and/or
B
(page 52)
.
15 Listening mode indicators
THX
– Lights when a Home THX mode is selected.
ADV. SURROUND
– Lights when an Advanced
Surround mode has been selected.
STEREO
– Lights when stereo listening is switched
on (see
Listening in stereo
on page 28).
STANDARD
– Lights when a Standard Surround
mode is switched on (see
Listening in surround
sound
on page 26).
16
SLEEP
Lights when the receiver is in sleep mode (page 65).
17 Matrix decoding format indicators
2
PRO LOGIC IIx – This lights to indicate 2Pro
Logic II / 2Pro Logic IIx decoding (page 26).
Neo:6 – When one of the Neo:6 modes of the receiver
is on, this lights to indicate Neo:6 processing
(page 26).
18 Character display
Displays various system information.
19 SR+
Lights when the SR+ mode is switched on (page 58).
2
1
3
8
7
6
9
10
11
12
18
14
13
16
19
17
4 5
15
SIGNAL
L
C
R
SL
S
SR
SBL SB
LFE
SBR
AUTO
ADV.SURROUND
STANDARD
SLEEP
THX
STEREO
SP
AB
HDMI
DIGITAL
STREAM
PRO LOGIC
DIGITAL
WMA9 Pro
CD
CD-R
TUNER
PHONO
MULTI IN
iPod
DVD
TV
SAT
DVR
VIDEO
[
1
]
HDMI
[
2
]
USB
SR+
DSD PCM
96/24
DTS
VIDEO
MULTI-ROOM
OVER ATT
TONE
MONO
dB
Hi-bit/sampling
DIALOGUE LOUDNESS STEREO
CONV. V.SB DNR MIDNIGHT
TUNED
EON
RDS
N
eo
: 6
2
2
DIRECT
ANALOG
VSX_AX4AVi.book.fm 23 ページ ２００５年６月２０日 月曜日 午後６時２７分