Philips SE735 - Manual (Page 62)

62
EN
Telephone Answering Machine (TAM)
Set Outgoing Messages (OGM)
1. If you set the answering mode as Answer Only or Answ. & Record , you can choose to set your outgoing
message as Predefined or Personalised .
2. The current selected mode is highlighted.
3. To change it, scroll
: to your selection and press m SELECT .
Predefined Outgoing Messages
Press m SELECT to set your outgoing message as Predefined , you can press m SELECT again to play the
outgoing message. The language of the predefined outgoing message can be changed in the Voice Language
menu (see page 65).
Personalised Outgoing Messages
If you set your outgoing message as Personalised , you can either play the existing outgoing message or record
your own outgoing message.
Playing your Personalised Outgoing Message
1. Scroll : to Play message and press m
SELECT .
2. The existing outgoing message will be played and the screen will return to previous menu once it has
finished playing.
Recording your Personalised Outgoing Message
1. Scroll : to Record message and press m SELECT .
2. Press m
START to start recording and press m
STOP to end the recording.
The recorded message will be played and the screen will return to the previous menu once it has finished
playing.
VIP mode
This feature is available only if you have subscribed to Caller Line Identification from your network provider.
When
VIP Mode is activated, the phone will play a personalised VIP greeting message for the members in the
VIP list when they call you.
VIP Mode is automatically activated if there is a number in the VIP list.
The following options are available in VIP Mode :
VIP List Add or delete numbers from the VIP list (maximum 6 numbers).
Answer Only Record and play the outgoing message for the VIP list in Answer Only mode.
Answ. & Record Record and play the outgoing message for the VIP list in Answ. & Record mode
If there is no existing outgoing message, the predefined outgoing message is played.
The maximum length of an outgoing message is 2 minutes.
When you record an outgoing message, the previous one is overwritten automatically.