Philips vr 685 User Manual

Page 16

Important programming notes

• When recordings have been programmed,

appears in

the display.

• The programmed recording will always be made at the

recording speed (SP/LP) that at the time has been
selected on the video recorder.

• You cannot operate the video recorder manually while a

programmed recording is being made. If you want to
interrupt the programmed recording, press the

STANDBY m

button.

• If the video recorder is switched on a few minutes before

a programmed recording is due to take place,
’TIMER RECORD’ will flash on the TV screen.

• If the end of the cassette is reached during a programmed

recording, the video recorder automatically ejects the
cassette.

• If you forget to load a cassette, after programming the

recording, ’NO CASSETTE’ will appear on the TV screen
for a few seconds.

• If you insert a cassette with erase protection, after

programming the recording, ’PROTECTED CASSETTE’ will
appear on the TV screen for a few seconds.
The cassette will then be ejected.

• When, after pressing the

TIMER k

button ’TIMER FULL’

appears on the TV screen, all TIMER blocks have been
programmed. Then, with the

P q

P r

button, select

the TIMER block you want to adjust or clear.

• If ’CODE ERROR’ appears on the TV screen, the

VIDEOPlus+ code was incorrect or the date was in-
correctly entered. Repeat the entry or end with the

STANDBY m

button.

With programming at daily intervals, the first recording
must take place within a week.

• If ’DAILY ERROR’ appears on the TV screen, the date was

incorrectly entered. Programming at daily intervals can
only be used for recordings to be made from Mondays to
Fridays inclusive.

• Programme numbers ’E1’ and ’E2’ are provided for

programmed recordings from external sources (via the

EXT.1

EXT.2

scart socket).