PYLE Audio PLTDF25 User Manual

Page 10

User ’s Manual - page 9

Initial System Start-Up

ESP Function

Be sure to press the

button ( 12)

When using the unit for the first time,

after all connections are completed
correctly.

1. Turn off the unit power.
2. Press

with a ballpoint pen or

similar pointed object.

Press

button (1) or insert a disc to

turn on the unit.

When system is on, press

button (1) to

turn off the unit.

1. Insert the disc into the disc slot (7)

with the printed side facing up. The
player will play the disc automatically.

2. Whenever press

button (6) to eject

the disc.

Press

button (26) to adjust

the volume level.

Press

button (3) to switch to the

desired input source.

The mode will change each time the

button is pressed.

In TV mode, pressing

button (3) on the unit for several seconds
will enter into searching state
automatically.

This unit features ESP (anti-shock)

protection. It works by “playing ahead”
and buffering the stored part of the
program, playing it back when the
realtime portion of the program has been

disrupted. Depending on the

listening/viewing mode you are in, the
amount of time of disruption which can be
hidden is as follows:

RESET

Turning Power On and Off

Loading/Removing a Disc

Adjusting the volume level

VOL+/VOL-

Input Source Select

MODE

MODE/SCAN

GENERAL OPERATION

CD, VCD: 18 seconds
MP3:160 seconds
DVD: 6 seconds
MPEG4: 20 seconds

Last Position Memory Feature

- During disc playback, if you press

button (1) to turn off the unit and then
press the button again to turn on the unit,
the DVD unit will resume playing from the
point that it was interrupted.
-During disc playback, if you press the

button (3) to switch to other mode,

and then return to DVD mode again, the
unit will resume playing from the point
that it was interrupted.

button on the housing must be

activated with either a ballpoint pen or
thin metal object. The

button (12)

is to be activated at the following times:
-After initial installation of the unit when
all wiring is completed.
-Some of the function buttons do not
operate.
- Error symbol appears on the display.
Note:
If the unit still does not function after you
have pressed

, try cleaning the

connectors which link the panel and the
main housing with a cotton swab
moistened with isopropyl (rubbing
alcohol). If it still does not work, bring the
unit to your dealer for servicing or advice.

MODE

RESET

Reset Function

DVD