Polycom SIP 2.2.2 - Manual (Page 177)

Configuration Files
A - 65
Bitmaps
The bitmaps used by each phone model are defined in this section.
Platform , , , , ,
In the following table, x=IP_300, IP_330, IP_400, IP_500, IP_600, IP_4000 and y
is the bitmap number. Note that IP_300 parameters affect SoundPoint IP 301
phones, IP_330 parameters affect SoundPoint IP 320 and 330 phones, IP_400
parameters affect SoundPoint IP 430 phones, IP_500 parameters affect
SoundPoint IP 501 phones, IP_600 parameters affect SoundPoint IP 550, 600,
601, and 650 phones, IP_4000 parameters affect SoundStation IP 4000 phones.
Indicators
The following indicators are used by the phone:
• Animations , , , ,
,
• Patterns
• Classes
• Assignments
Attribute Permitted Values Interpretation
bitmap.x.y.name The name of a bitmap
to be used. This is the name of a bitmap to be used for creating an
animation. If the bitmap is to be downloaded from the boot
server, its name must:
• Be different from any name already in use in sip.cfg.
• Match the name of the corresponding .bmp to
be retrieved from the boot server.