Philips VR130/07 - Manual (Page 14)

14
EN
Blue Background on or off
If you want the TV screen to be solid blue when
a weak signal is received, set BLUE BACK-
GROUND to ‘ON’. The screen will be blue and
the sound will be muted. Or, if you want to
receive the weak signal, set BLUE BACK-
GROUND to ‘OFF’.
1. 1. Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2. 2. Press . The main menu will appear.
3. 3. Select 'VCR SET UP' using and
confrim with .
4. 4. Select 'BLUE BACKGROUND' using
and confirm with .
5. 5. Select 'OFF' (no blue background) or 'ON'
(blue background on) with .
If you select 'OFF', the menu display will disap-
pear.
6. 6. To end, press .
Automatic switch-off
If you haven't used the video recorder for a few
minutes in certain modes (e.g.: STOP), it will
switch to standby automatically. You can cancel
this function to use the video recorder as a tele-
vision receiver.
1. 1. Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2. 2. Press . The main menu will appear.
3. 3. Select 'VCR SET UP' using and
confrim with .
4. 4. Select 'AUTO STANDBY' using .
5. 5. Select 'OFF' (no automatic switch-off) or 'ON'
(automatic switch-off) with .
6. 6. To end, press . STATUS/EXIT
B 1
L C K B
B 1
L C K B
MENU
STATUS/EXIT
B 1
B 1 L C
K B
B 1
L C K B
MENU
SELECT K L CHOOSE B
REPEAT PLAY [ON]
STATUS DISPLAY [ON]
BLUE BACKGROUND[ON]
→AUTO STANDBY [ON]
END=EXIT
SELECT K L CHOOSE B
REPEAT PLAY [ON]
STATUS DISPLAY [ON]
→BLUE BACKGROUND [ON]
AUTO STANDBY [OFF]
END=EXIT
VR130/07(EN).QX4 02.4.23 11:17 PM Page 14