Philips AZ5150 - Manual (Page 17)

CASSETTE RECORDER
17
English
1. Set the source selector to TUNER.
– The POWER indicator lights up.
2. Tune to the desired radio station using the TUNING knob.
3. Press STOP•OPEN
9 / to open the cassette holder.
4. Insert a blank tape.
5. Press RECORD
0 to start recording.
– A whistling sound during AM recordings can be eliminated
by setting the OSC switch to any of the three
positions (1,2 or 3) to give the best reception.
6. For brief interruptions, press PAUSE ;. To resume recording,
press PAUSE ; again.
7. To stop recording, press STOP•OPEN 9 /
1. Set the source selector to CD.
– The POWER indicator lights up.
2. Insert a CD and if desired, programme track numbers.
3. Press STOP•OPEN
9 / to open the cassette holder.
4. Insert a blank cassette.
5. Press RECORD
0 to start recording.
™ Playing of the CD programme starts automatically from the
beginning of the programme. It is not necessary to start the
CD player separately.
6. For brief interruptions, press PAUSE ;. To resume recording,
press PAUSE ; again.
7. To stop recording press STOP•OPEN
9 /
To select and record a particular passage within a track
1. Press SEARCH
∞ or §to select a passage.
2. Put the CD player in PAUSE ; position at the selected passage.
™ Recording will start from this exact point when you press RECORD 0.
RECORD PLAY
SEARCH
STOP-OPEN PAUSE
STOP
SEARCH
SHUFFLE/ REPEAT
PROGRAM
SHUFFLE
POWER
VOLUME
DBB DYNAMIC BASS BOOS T
PREV
NEXT
SYNCHRO START CD RECORDING
BAND
FM LW M W
TUNNING
MHz kHz k Hz
175 200 225 250 280
92 88
96 100 104 108
¥ FM ¥ LW ¥ MW
150 630 800 1000 1300 1600
530
RECORDING FROM THE RADIO
AZ 5150 page 17
AZ5150/01 eng 02/20/02 16:53 Page 17