Philips AZ5150 - Manual (Page 16)

CASSETTE RECORDER
16
English
1. Set the source selector to TAPE/ POWER OFF .
2. Press STOP•OPEN 9 / to open the cassette holder.
3. Insert a recorded cassette.
4. Press PLAY
1 and playback will start.
– The POWER indicator lights up.
5. Adjust the sound using the VOLUME and DBB controls.
6. For brief interruptions, press PAUSE
;. Press PAUSE ; again to
resume playback.
7. By pressing 5 or 6,fast winding of the tape is possible in both
directions.
8. To stop playback, press STOP•OPEN 9 /
™ The keys are automatically released at the end of the tape.
9. Set the source selector to TAPE/ POWER OFF position (with the
cassette keys are released) to switch off the set.
– The POWER indicator goes out.
General information on cassette recording
• Recording is permissible insofar as copyright or other rights
of third parties are not infringed.
• This deck is not suitable for recording on CHROME (IEC II)
or METAL (IEC IV) type cassettes. For recording you should
use NORMAL type cassettes (IEC I) on which the tabs have
not been broken.
• Check and tighten slack tape before use with a pencil, to
aviod jamming the deck machanism.
• The recording level is set automatically. Altering the VOLUME
and DBB controls will not affect the recording in progress.
• No recording will take place during the 7 seconds, when the
leader tape passes the recorder heads.
• To prevent the accidental erasure of a recording, keep the
cassette side to be safeguarded in front of you and break out
the left tab. Recording on this side is no longer possible.
1
CASSETTE RECORDING
RECOR D
PLAY
SEARCH
STOP-OPEN PAUSE
PROG
SHUFFLE
POWER
VOLUME
DBB DYNAMIC BASS BOOS T
CASSETTE PLAYBACK
AZ 5150 page 16
AZ5150/01 eng 02/20/02 16:53 Page 16