Protec PROTEK II SN - Manual (Page 4)

4
3.0. KEYPAD FUNCTIONS
1. Turns the power on
ON 2. Turns the power off
3. Selects displayed value or displayed sub-menu option
1. Enters calibration mode
2. Increases displayed value in calibration mode
3. Increases number of measurements in CAM mode
1. Enter CAM ( average ) mode.
2. Decreases displayed value in calibration mode
3. Decreases number of measurements in CAM mode
mils-to-micron-to-mils
3.1. Special Key Combinations
ON + Press both keys simultaneously to
changes units of measure from
mils-to-micron-to-mils
ON + Press both keys simultaneously to reset
all settings back to factory defaults