Philips SPC505NC/27 - Manual (Page 12)

EN
12
The Philips SPC500NC/SPC505NC video property can be
changed from within an application, or independently by clicking
the VProperty icon
which can be found in the Windows
taskbar bottom right of your screen. Most applications can show a
'live preview' video image on your monitor. Always use this option
to see the effect of changed settings on your screen.
General controls
1 Flickerless
The Flickerless option should only be used under flickering
light conditions (e.g. fluorescent or neon lamps) to prevent
flickering or strangely colored video images.
If this option is used under normal lighting conditions the
video image may be overexposed.
2 Region
If you are using the Philips SPC500NC/SPC505NC in Europe,
select '50 Hz' and if you are using the Philips SPC500NC/
SPC505NC in North America, select '60 Hz'. For Asia this
setting is dependent on the local mains output. E.g. for China,
select ‘50 Hz’ and for Taiwan, select ‘60 Hz’. For Japan the
setting is region dependent.
Please check your local mains output to find the correct
‘Region’ setting.
1
2
WebCam settings