Poulan 966432901 - Manual (Page 16)

16
8. Pull guide bar forward until the chain
is snug in the guide bar groove. En-
sure all drive links are in the bar
groove.
9. Install bar clamp. Be sure adjusting
pin is in the adjusting pin hole in the
guide bar.
CAUTION: It is very important when ins-
talling the bar clamp that the adjusting pin
aligns into the adjusting pin hole in the bar.
Failure to install the bar clamp correctly
may result in permanent damage to your
chain saw.
Back
view of
bar
clamp
Adjusting pin
10. Install bar knob; finger tighten only.
Do not tighten any further at this
point. Proceed to CHAIN ADJUST-
MENT.
CHAIN ADJUSTMENT
See CHECK CHAIN TENSION in the MAIN-
TENANCE section.
CUSTOMER SERVICEABLE PARTS
WARNING: Use of any other ac-
cessory or attachment might present a
risk of injury to the operator.
REPLACEMENT PART PART NO.
Oil Cap 530053072
Chain Catcher 530029850
Screw 530016269
File (5/32″ dia.) Twin Pak 952055085
Chain --18″ 952051338
Guide Bar -- 18″ 952044418
Bar & Chain Lubricant --1 qt. 952030203
Bar & Chain Lubricant --1 gal. 952030204
STORAGE
WARNING: Perform the following
steps after each use:
S
Allow motor to cool before storing or
transporting.
S Store chain saw and extension cord in a
well ventilated area
S Store chain saw with all guards in place
and position chain saw so that
any sharp object cannot accidentally
cause injury.
S Store chain saw unplugged, well out of
the reach of children.
SEASONAL STORAGE
Prepare your unit for storage at the end of
the season or if it will not be used for 30
days or more.
If your chain saw is to be stored for a
period of time:
S
Clean it thoroughly before lengthy stor-
age.
S
Store in a clean dry area.
S Lightly oil external metal surfaces and
guide bar.
S Oil the chain and wrap it in heavy
paper or cloth.