Palsonic TFTV421080HD - Manual (Page 7)

Preparations
(continued)
5
1.Unplug the TV set and all connected components before connecting the speakers.
2.The illustration may be different depending on model.
Connect the speaker audio cable to the external
speaker output jack on the unit matching the "+"
and "-" ends of the cable.
Insert the AC plug into a conveniently located AC outlet.
= This product should be operated only from the type of power source indicated on the marking label.
= Always unplug the AC cord from power outlet when not using for a long period of time.
75-ohm coaxial cable (round cable)
INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture
screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna must be used.
The exact type and position of the antenna will depend upon your particular area.
= It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave
conditions.
= The antenna cable should not be bundled with the power cord.
TV REAR
RF
Antenna Connection
Power Connection
Note
Note
Speaker Connection
Note