Philips SPC225NC - Manual (Page 10)

Connecting the WebCam to your PC /
laptop
General
1 Be sure to run the installation CD first, before connecting the
WebCam to the PC / laptop.
2 Turn on the PC / laptop.
3 Connect the USB connector of the USB cable to the USB port
of the PC / laptop.
> The WebCam will now derive its power from the PC / laptop.
4 Aim the webcam as required.
5 Push the USB cable into the cable management slot.
6 Use the clamp and the two rubber rims to attach the WebCam
to your PC monitor or laptop screen.
SPC220NC WebCam
7 Peel off the protective foil on the rear of the microphone
(SPC220NC only) and attach the microphone to the PC monitor
or laptop screen.
8 Connect the microphone plug to the microphone or green
socket of the sound card.
Installation
EN
10
7
3
3
5
6
6
8
5