Warning – Poulan PPB200 LE User Manual

Page 4

-- 4 --

Make sure the unit is properly assembled

and in good operating condition.

Do not fill fuel tank while engine is hot or

running.

Avoid spilling fuel or oil. Wipe up fuel spills

before starting engine.

Move at least 10 feet (3 meters) away from

fuel and fueling site before starting engine.

Always store gasoline in a container ap-

proved for flammable liquids.

OPERATE YOUR UNIT SAFELY

WARNING:

Stop the engine before

opening the vacuum inlet door. The engine

must be stopped and the impeller blades no

longer turning to avoid serious injury from the

rotating blades.

Inspect unit before each use for worn,

loose, missing, or damaged parts. Do not

use until unit is in proper working order.

Keep outside surfaces free of oil and fuel.

Never start or run engine inside a closed

room, building or other unventilated area.

Breathing exhaust fumes can kill.

To avoid static electricity shock, do not

wear rubber gloves or any other insulated

gloves while operating unit.

Do not set unit on any surface except a

clean, hard area while engine is running.

Debris such as gravel, sand, dust, grass,

etc. could be picked up by the air intake and

thrown out through discharge opening,

damaging unit, property, or causing serious

injury to bystanders or operator.

Avoid dangerous environments. Do not use

in unventilated areas or where explosive

vapors or carbon monoxide build up could

be present.

Do not overreach or use from unstable sur-

faces such as ladders, trees, steep slopes,

rooftops, etc. Keep firm footing and balance

at all times.

Never place objects inside the blower

tubes; always direct the blowing debris

away from people, animals, glass, and solid

objects such as trees, automobiles, walls,

etc. The force of air can cause rocks, dirt, or

sticks to be thrown or to ricochet which can

hurt people or animals, break glass, or

cause other damage.

Never run unit without the proper equip-

ment attached. When using your unit as a

blower, always install blower tubes. When

using your unit as a vacuum, always install

vacuum tubes and vacuum bag assembly.

Make sure vacuum bag assembly is com-

pletely zipped.

Check air intake opening, blower tubes,

vacuum tubes, and elbow tube frequently,

always with engine stopped and spark plug

disconnected. Keep vents and discharge

tubes free of debris which can accumulate

and restrict proper air flow.

Never place any object in the air intake open-

ing as this could restrict proper air flow and

cause damage to the unit.

Never use for spreading chemicals, fertiliz-

ers, or other substances which may contain

toxic materials.

To avoid spreading fire, do not use near leaf

or brush fires, fireplaces, barbecue pits,

ashtrays, etc.

Use only for jobs explained in this manual.

MAINTAIN YOUR UNIT PROPERLY

Have all maintenance other than the rec-

ommended procedures described in the in-

struction manual performed by an autho-

rized service dealer.

Disconnect spark plug before performing

maintenance except for carburetor adjust-

ments.

Use only recommended Poulan PRO re-

placement parts; use of any other parts

may void your warranty and cause damage

to your unit.

Empty fuel tank before storing the unit. Use

up fuel left in carburetor by starting engine and

letting it run until it stops.

Do not use any accessory or attachment

other than those recommended by manufac-

turer for use with your unit.

Do not store the unit or fuel in a closed area

where fuel vapors can reach sparks or an

open flame from hot water heaters, electric

motors or switches, furnaces, etc.

Store in a dry area out of reach of children.

SPECIAL NOTICE:

Exposure to vibra-

tions through prolonged use of gasoline pow-

ered hand tools could cause blood vessel or

nerve damage in the fingers, hands, and

joints of people prone to circulation disorders

or abnormal swelling. Prolonged use in cold

weather has been linked to blood vessel dam-

age in otherwise healthy people. If symptoms

occur such as numbness, pain, loss of

strength, change in skin color or texture, or

loss of feeling in the fingers, hands, or joints,

discontinue the use of this tool and seek

medical attention. An antivibration system

does not guarantee the avoidance of these

problems. Users who operate power tools on

a continual and regular basis must monitor

closely their physical condition and the condi-

tion of this tool.

SPECIAL NOTICE:

For users on U.S. For-

est Land and in some states, including Cali-

fornia (Public Resources Codes 4442 and

4443), Idaho, Maine, Minnesota, New Jersey,

Oregon, and Washington: Certain internal

combustion engines operated on forest,

brush, and/or grass covered land in the above

areas are required to be equipped with a

spark arresting screen, maintained in effec-

tive working order, or the engine must be con-

structed, equipped, and maintained for the

prevention of fire. Check with your state or lo-

cal authorities for regulations pertaining to

these requirements. Failure to follow these

requirements is a violation of the law. This unit

is not factory equipped with a spark arresting

screen; however, a spark arresting screen is

available as an optional part. If a spark arrest-

ing screen is required in your area, contact

your authorized service dealer for the correct

kit. The spark arresting screen, blower tubes,

and nozzles must be assembled to unit to be

in full compliance with regulations.