Philips BL-C10 - Manual (Page 70)

Operating Instructions
70
2.14 Specifying Operation Time
The Operation Time page allows you to limit the operation time. The camera image
turns to a gray screen outside the operation time.
1. Click [Operation Time] on the Setup page.
2. Click [No.] to set the operation time.
Note
If No. 1—7 are disabled, the camera can always be operated.
3. Check [Enable], set the time, and click [Save]
• Clicking [Cancel] takes you back to the previous page without saving
changes.
Setting Description
Enable • Check the box to enable the setting. Clear the box to
disable it.
A day of the
week • Check the box to enable the day. Clear the box to disable
it.
Operation Time • Select the [Always] option when you do not specify the
time period. If you specify the time period, select the time
period option and set the time period.