Philips BL-C10 - Manual (Page 61)

Operating Instructions
61
4. Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer
buffer/transfer (see page 36).
• Clicking [
• Clicking [Cancel] takes you back to the Image Buffer/Transfer page
without saving changes.
5. Set the Lens Position When Triggered setting, and click [Next>].
Note
If you enable the Lens Position When Triggered setting, buffer/transfer starts
after the camera turns to the sensor position.
• Clicking [
• Clicking [Cancel] takes you back to the Image Buffer/Transfer page
without saving changes.
Setting Description
A day of the
week • Check the box to enable the day. Clear the box to disable
it.
Active Time of
Trigger • Select the [Always] option when you do not specify the
time period. If you specify the time period, select the time
period option and set the time period.