POSIFLEX Business Machines PP2000 - Manual (Page 25)

PP2000 (E) User’s Manual 7 - 1
VII. REGULAR MAINTENANCE
PROCEDURE
A. DAILY MAINTENANCE
Perform a basic cleaning and maintenance daily at a suitable
timing as following
1. Turn power off and open the top cover.
Press down the receipt lever and the
journal lever. Take out both the paper
roll of receipt and journal.
2. Use the attached soft brush to clean the
area of the paper exit as indicated in
Fig.1.
3. Pull both the receipt lever and journal
lever forward to raise the print anvil
assembly. Use the attached soft brush
to clean the insert slot area in the
direction as indicated in Fig.2. Brush
gently away the dust and paper
residuals in the direction from the
journal end to the receipt end.
4. Check for dust and paper residuals in
the stamp area. Use the attached soft
brush to clean this area as indicated in
Fig.3.
5. Replace the print anvil assembly. Use
mini-vacuum cleaner if necessary to
remove all the dust and paper residuals
out of the interior of the printer.
6. Check if the ribbon is still integrated and in good condition. Replace
a new ribbon if any damage found.
Fig 1 Paper exit area
Paper exit area
Fig 2 Insert slot area
Insert slot area
Fig 3 Stamp area
Stamp area