POSIFLEX Business Machines PP2000 - Manual (Page 14)

PP2000 (E) User’s Manual 3 - 6
4. To give an idea about the positioning matter of the receipt, the print
center is 33.3 mm behind the auto-cut position, whilst the stamp
center is 40.0 mm behind the print center.
J. SELF TEST
Please power off the printer for at least three seconds and then
press and hold the receipt button while turning the on / off switch on. A
slip of self test result is printed on both receipt and journal side. Any
signal of the receipt button after the printing of self test result will cause
paper feed of receipt.
K. REPLACE TOP COVER
If there is any difficulty in applying all the five hooks on top cover
into the bottom base of the printer, always align the left three hooks first
and then press down the top cover to the base. In this way, the top cover
will not come in conflict with the receipt lever
L. CLEAR BUFFER
The PP2000E series provides a data preservation function during
power off. This function helps the user to go on printing after an
unexpected power failure. However there can be occasions that the user
wants to restart the printer without printing the unwanted data received
before the printer is turned off. To have the data input buffer cleared, the
user may turn off the printer then press and hold both on line and journal
switches during turning on the printer again.