Pandigital Version: PAN.1 - Manual (Page 6)

Note: The card will only fit in one direction; do not force it. The card should fit snugly when
properly inserted. Turn the Power Switch on the back of the Digital Photo Frame ON. The Digital Photo
Frame will automatically start a slide show of the photos on the card.
4. To display photos individually, press the Exit button to open the Thumbnails Screen. Use
the Up and Down arrows to choose a photo. Press the Play button (>/II) on the top of the
Digital Photo Frame, or the Enter button on the remote control.
Note: Pull the plastic tab sticking out of the remote control. It protects the battery, and the
remote control will not work unless it is removed.
5.
To restart the Slide Show, press the Play button (>/II) again, or press the Slide Show
button on the remote control.
Locating the Digital Photo Frame's Features
Photo and description of buttons on photo frame.
Using the Control Buttons and Remote Control
You can use all of the Digital Photo Frame's features with either the buttons on top of the frame or using the
remote control.
Use the Control Buttons
The control buttons are located on top of the Digital Photo Frame. Their basic functions are the same no matter
when you press them.
Note: You can open the Setup Menu at any time by pressing and holding the EXIT button.
Button Action
<<
Move the selection up or left, display
the Previous photo, or select the
previous file.
II>
Select the highlighted option, start a
Slide Show, Pause or Play.
>>
Move the selection down or right,
display the next photo or select the
next file.
EXIT
Exit the current display, or go back a
screen.