Parkside PDKS 120 - Manual (Page 6)

6 GB/IE/CY
Scroll saw PDKS 120
Q Introduction
Before you use it for the first time, it is es-
sential that you make yourself fully familiar
with the functions of the appliance and
find out how to correctly handle electrically powered
tools. To do this, read the following operating in-
structions carefully. Retain these instructions for
future reference. Additionally, pass them on to who-
ever might acquire the appliance at a future date.
Q Intended purpose
The scroll saw is intended for the intricate cutting of
wood and plastic in a DIY environment (see Fig. F).
Any other uses, and modifications to the appliance,
are deemed to be improper usage and may result
in serious physical injury. The manufacturer accepts
no responsibility for damage(s) resulting from
improper usage.
Q Features and equipment
1 Dust blow tube
2 Stroke rate controller
3 OFF button
4 ON button
5 Angle setting screw
6 Saw table
6 a Angle scale
7 Saw blade
8 Top saw blade mounting
9 Blade guard
10 Knurled nut
10 a Plain washer
10 b Guide plate
10 c Screw
11 Attachment arm
12 3 x Threaded feet with nut,
washer and retaining ring
13 Clamping lever
14 Bottom blade mounting
Q Included items
1 x Scroll saw PDKS 120
1 x Blade guard
2 x Knurled nuts
2 x Plain washers
Introduction
The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Keep children away from electrical
power tools!
V~
Volt (AC)
Caution – electric shock!
Danger to life!
W
Watts (effective power) For indoor use only!
n
0
No-load stroke rate
Risk of loss of life by electric shock from
damaged mains lead or mains plug!
Observe caution and safety notes!
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Risk of explosion!
Dispose packaging and appliance in
an environmentally-friendly way!
33383_SCROLL SAW_Dekupiersaege_Content_LB6.indd 6 23.07.09 11:29