Figure 11 – ParaBody 887 User Manual
Page 12
12
STEP 11:
FIGURE 11
• Loop the 121-3/4” CABLE (12) around one 3-1/2” PULLEY (9) as shown in FIGURE 11.
• LOOSELY assemble the 3-1/2” PULLEY (9) to the 3/16 X 1-3/4 X 5-1/4” PLATES (23) using one 3/8 X 2” BOLT (35), two 3/8” WASHERS
(30), and one 3/8” LOCK NUT (31). See FIGURE 11.
• SECURELY thread the end of the 121-3/4” CABLE (12) 3/4 of the way into into the threaded housing on the UPRIGHT and SE-
CURELY tighten jam nut.
35 3/8 X ”
30
23
9
31
UPRIGHT
12
SECURELY
TIGHTEN
JAM NUT!
THREADED END
• SECURELY tighten the two 3/8 X 2” BOLTS (35) of the 3/16 X 1-3/4 X 5-1/4” PLATES (23).
See also other documents in the category ParaBody Sports and recreation:
- Free Weight Systems (5 pages)
- 886101 (3 pages)
- 425/660 (2 pages)
- 822 (9 pages)
- 848101 (14 pages)
- 881 (26 pages)
- Free Weight Smith System (5 pages)
- Leg Press 100101 (14 pages)
- 360101 (11 pages)
- 777 (5 pages)
- 832102 (14 pages)
- Leg Press 100 (11 pages)
- 205101 (1 page)
- 425 (2 pages)
- 440 (33 pages)
- 426103 (45 pages)
- Hip Sled System (24 pages)
- 824 (8 pages)
- 425103 (40 pages)
- GS2 (24 pages)
- 826 (8 pages)
- 856 (6 pages)
- 400101 (27 pages)
- 829 (14 pages)
- 435104 (13 pages)
- GS6 (8 pages)
- 842 (6 pages)
- 778 (13 pages)
- 375101 (22 pages)
- Leg Press 5 (15 pages)
- 838 (10 pages)
- 441101 440 (10 pages)
- LP5 (15 pages)
- Home Guide (9 pages)
- 888 (15 pages)
- cm3 (8 pages)
- 870 (4 pages)
- 893103 (20 pages)
- 890 (10 pages)
- 250101 (18 pages)
- 843 (12 pages)
- GS4 (1 page)
- 849 (7 pages)
- 855 AB (9 pages)
- 883 (31 pages)