Pioneer PD-D9-J - Manual (Page 13)

Getting started 04
13
En
English
Deutsch
Italiano
Español
Français
Nederlands
FAQ
• Why can’t I hear SACD audio through the
digital outputs?
SACD audio is only available through the
analog outputs. This is not a malfunction.
Other playback features
The following features allow you to customize
the playback order. Note that these features
are not available with data discs (containing
WMA/MP3 files).
Using repeat play
There are two repeat play options available
during playback.
• During playback, press REPEAT to select a
repeat play mode.
Select between 1-track repeat (
REPEAT lights
in the display), all repeat ( ALL REPEAT lights in
the display), or repeat off.
• It’s also possible to use ‘all’ repeat play
together with program play (see Creating a
program list below).
Using random play
Use the random play feature to play tracks at
random. You can set the random play option
when a disc is playing or stopped.
1
• Press RANDOM to start random play.
Random play remains in effect ( RANDOM
shows in the display) until you press  (or
RANDOM again) to cancel.
Tip
• Use the following controls during random
play:
Creating a program list
This feature lets you program the play order of
tracks on a disc.
2
1 While stopped, press PROGRAM.
2 Use the number buttons and ENTER to
select a track for the current step in the
program list.
If you accidently enter the wrong track, press
CLEAR to delete it.
3 Repeat step 2 to build up a program list.
A program list can contain up to 24 tracks.
4 To play the program list, press  (play).
Program play remains active ( PGM shows in
the display) until you stop playback (press
 (play) after  (stop) to start normal
playback).
• Press PROGRAM then  (play) to restart
program play.
• To add more tracks to the program list,
repeat steps 1 and 2.
• When the disc is stopped, press
PROGRAM then CLEAR to erase one track
at a time (from the end of the list), or simply
press
CLEAR to erase all tracks.
 Skips to the next track.
Numbers
(not available
with MP3/
WMA data
discs)
Use to enter a track number. Press
ENTER to select.
• If the disc is stopped, playback
starts from the selected track.
• If the disc is playing, playback
jumps to the start of the selected
track.
Note
1 You can’t use random play together with program play.
Button What it does
Button What it does
 Selects a new track at random.
 Returns to the beginning of the
current track.
2 You can’t program pauses, or use program play together with random or 1-track repeat play.
PD-D9-J_MY.book Page 13 Thursday, August 2, 2007 2:12 PM