Polycom 500 2G4 - Manual (Page 4)

1–1
1
How to Register a Master Handset
When turning on the KIRK System 500 2G4, it will automatically go into
registration mode for a period of 15 min. In this period you can register the
MASTER handset. (it’s only possible to login 1 MASTER on each system. The
first handset is automatically the MASTER handset).
It is now possible to register the first handset (it will automatically be
configured to channel 00).
• Press the menu key.
• Press the < key twice
• The menu will now show ”LOGIN ”
• Press the
✓key – the menu will show ”Select login ”
• Press the > key once – then press ✓- the menu will now show: Subscription
search ID:
The handset will start searching for ”your” System 500. When the handset
finds a system, a number will appear in the display.
The handset might detect more than one number (This only happens if the
handset detects another system nearby. It does not mean that your - or the
other - system communicates! There are no safety problems attached to this
indication)
If the handset detects more than one system, a black triangle will appear in the
bottom of the display, indicating that you can press the < key or the > key.
It is now possible to scroll between the numbers in the display by pressing the
< or the > key.
It is important that the number shown in the display is identical to the number
which you find on your System 500. The number is indicated as an ARI
(indicated on the label on the back of the base station).
When you are certain to have indicated the correct number, press the
✓key
and the handset will be configured as the MASTER handset of the system.
Now you have to allocate an extension number to the handset:
You can now enter the Serial Number of the new handset (found inside the
handset )