Palsonic 8010PF - Manual (Page 12)

6. The setting of colour and sound system
Press the SYS button, the screen will display colour and
sound system.
If the displaying colour is abnormal, press the or button
to select COLOUR, then press the or button to select
the right colour system. Every time you press or button,
the colour system will change in the sequence on the right.
Press the SYS button
SYSTEM
COLOR AUTO
If the sound is abnormal, press the or button to select
SOUND, then press the or button to select the right
sound system. The sound system will change in the sequence
on the right:
Now you can watch the broadcasting TV program at the
preset channel.
You can select your desired TV program by one of the following
methods.
2. Making use of the CH button
Press the CH button, the channel number will increase pro-
gressively. Press the CH button, the channel number will
decrease progressively.
10
AUTO PAL SECAM NTSC 4.43 NTSC 3.58
I M B/G D/K
Making use of the direct select buttons 0 ~ 9 and - /- -
To select a one - digit channel, press - /- - button to display
" - " on the upper right corner of the screen, then directly
press a number button of 0 ~ 9. To select a two-digit channel,
press the - / - - button to display "- - " on the upper right
corner of the screen, then press the number buttons. The
hannel range is 0 ~ 99.
10
Press the - / - - button
Press the 0 ~ 9 button
- -
3. Making use of the button
Press the button, it can switch back quickly to the previous
channel. For example, the channel you previously watched is
2, the present channel is 8, press the button, it will return
to channel 2, press the button it will return to channel 8.
2
8
Press the button
Channel selection
6.1
6.2
6.3
1.