Palsonic 8010PF User Manual

Page 10

3. MANUAL SEARCH

If AUTO-SEARCH cannot preset the desired channels,
or you want to preset the desired channels one by
one with the preferred channel numbers - please make
use of MANUAL SEARCH.

Press the menu item select button or to select
MANUAL SEARCH (the caption on the screen are
red).

Press the or button to enter into the sub-menu
of MANUAL SEARCH.

Press the or button to choose POSITION.
(the caption on the screen are red), press the or
button to select the needed program number (from
00 ~ 99.

Push the or button to select a channel number
within 0.7 of a second. Push and hold the or
button for more than 0.7 of a second to select a
decimal number.

Press the or button to select SEARCH, push
the button to search channels from current channel
to higher channel. Push the button to search
channels from current channel to lower channel.
When a channel is located, the searching stops, this
channel is then memorised with a present channel
number.

You can also make use of band selection to quicken
the searching process in your desired band. Pressing
the or button moves the band to the next step
in the sequence below.

MANUAL SEARCH

AUTO SEARCH

Press the or button
to display the menu of
MANUAL SEARCH

MANUAL SEARCH

Press the button to
select the wanted channel
number

When a station is searched
the searching stops

Press the button
it begins searching

Press the or button
to select SEARCH

POSITION 22

Press the button

select SEARCH

POSITION 22

VHFL

UHF

VHFH

Press the or button
to select MANUAL
SEARCH

3.1

3.2

3.3

Note:

3.4

Note: