Hd c, Ideo, Onnections – Philips Wall Mounting User Manual

Page 7

�

S-VIDEO

OUT

AUDIO

VIDEO

COMP��

�

COMPONENT

VIDEO CABLES

(Green, Blue, Red)

ACCESSORY DEVICE

EQUIPPED WITH COMPONENT

VIDEO OUTPUTS.

Power Cable

Audio Cable

��

�

HD video input provide the highest possible color and
picture resolution in the playback of digital signal source material,

such as with DVD players. If you are using a HD (High Deﬁ nition)
receiver that can transmit high deﬁ nition programming, the TV can
accept those signals through the HD input located on the bottom of
the TV.

Connect the HD (Y, Pb, Pr) Video OUT jacks from the DVD player
(or similar device) to the HD VIDEO Input jacks on the bottom of
the LCD TV.

Connect the red and white AUDIO CABLES to the Audio (left
ad right) output jacks on the rear of the accessory device to the
AUDIO IN jack. Connect the other end of the cable to the Audio
jack on the rear of LCD TV.

Plug the DC Adapter into the DC IN 16 V jack on the LCD TV.
Plug the power cable into an outlet. Turn on the LCD TV and other
equipment.

Press the AV button on the remote control to select HD. HD will
appear in the upper left corner on the TV screen.

Insert a DVD disc into the DVD player and press the PLAY button

on the DVD Player.

1
2

4
5

The S-Video connection on the rear of the LCD TV can provide you
with better picture detail and clarity for the playback of accessory
sources such as DBS (digital broadcast satellite), DVD (digital video
discs), video games, and VHS VCR (video cassette recorder) tapes
than the normal antenna picture connections.

Connect an S-Video cable to the S-VIDEO jack of the other

equipment (DVD Player, Camcorder, etc.) and to the S-VIDEO jack

on the rear of the LCD TV.

Connect RCA-style audio cables (usually red and white) to the

AUDIO OUT (left and right) jacks on the other equipment.

Connect the other end of the cables to the AUDIO jack on the

side of the LCD TV.

Plug the DC Adapter into the DC IN 16V jack on the LCD TV.

Plug the power cable into an outlet. Turn on the LCD TV and other

equipment.

Press the AV buttons to set the LCD TV to its S-VIDEO mode.

Press PLAY on the other equipment to view its material on the

LCD TV.

Note:

•

The Philips LCD TV remote control can not be used to operate other video/audio

equipment.

•

The Audio jack of AV IN is shared between Video (CVBS) and S-Video signals. If Audio

and Video is connected to S-Video input, you can still hear sound if you select Video via
AV select, even there appears no image on screen.

S-V

IDEO

ONNECTIONS

HD C

ONNECTIONS

��

� ��

��

�

� ��

�

��
��

��

VIDEO

�

��

S - VIDEO

AUDIO

��

�

Note:

•

The Philips LCD TV remote control can not be used to operate