Philips AVENT SCF860/20 - Manual (Page 12)

Problem Possible cause Solution
The sealing ring is not or not
properly placed in the blender
beaker lid.
Put the sealing ring properly in the
blender beaker lid.
There is too much food in the
blender beaker.
Switch off the appliance and process a
smaller quantity.
The wet mill
vibrates strongly,
produces a lot of
noise or the blade
unit is out of
alignment.
You have not assembled the
blade unit properly onto
the wet mill beaker.
Screw the blade unit properly onto
the wet mill beaker.
The food in the wet mill
beaker blocks the blades.
Remove the food that blocks the blade
and/or process a smaller quantity.
The wet mill leaks. The sealing ring is not or not
properly placed on the blade
unit.
Unplug the appliance. Remove the blade
unit and assemble the rubber
ring properly onto the blade unit.
EngliSh 12