Philips DCM580 - Manual (Page 9)

10
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from ‡
KHDWVXQVKLQHRUÀUH1HYHUGLVFDUGEDWWHULHV
LQÀUH
)RUÀUVWWLPHXVH
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control batteries:
1
Open the battery compartment.
2
Insert one lithium CR2025 battery with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
Note
Before you press any function button on the ‡
UHPRWHFRQWUROÀUVWVHOHFWWKHFRUUHFWVRXUFH
with the remote control instead of the main
unit.
If you are not going to use the remote control
‡
for a long time, remove the battery.
Set clock
1
In standby mode, press PROG/CLOCK
on the remote control to activate the
clock setting mode.
The 12 hour or 24 hour format is
»
displayed.
Connect power
Caution
Risk of product damage! Ensure that the ‡
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
Risk of electric shock! When you unplug the
‡
AC power cord, always pull the plug from the
socket. Never pull the cord.
Before connecting the AC power cord, ensure
‡
you have completed all other connections.
Note
The type plate is located on the back of the ‡
main unit.
1
Connect the power cord to the
AC~MAINS jack on the main unit.
2
Connect the power plug to the wall
outlet.
EN