Philips DCM580 - Manual (Page 15)

16
10 Other features
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
When sleep timer is activated, the
»
display shows [SLEEP](sleep) .
To deactivate sleep timer
1
Press SLEEP repeatedly until “OFF” is
displayed.
When sleep timer is deactivated,
»
[SLEEP](sleep) disappears on the
display.
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, TUNER, USB or iPhone/iPod is activated
to play at a preset time.
1
Ensure that you have set the clock
correctly.
2
Press and hold TIMER.
3
Press CD, USB, TUNER or iPhone/iPod
to select a source.
4
Press TIMER WRFRQÀUP
The hour digits are displayed and begin
»
to blink.
5
Press / to set the hour.
6
Press TIMER WRFRQÀUP
The minute digits are displayed and
»
begin to blink.
7
Press / to set the minute.
8
Press TIMER WRFRQÀUP
The timer is set and activated.
»
9 Adjust sound
Adjust volume
1
During play, press VOL +/- to increase/
decrease the volume.
Adjust subwoofer volume
1
During play, press SUB.VOL to increase/
decrease the volume.
Select a preset sound effect
1
During play, press DSC repeatedly to
select:
>)/$7@ÁDW ‡
[POP] (pop) ‡
[JAZZ] (jazz) ‡
[ROCK] (rock) ‡
[CLASSIC] (classic) ‡
Enhance bass
1
During play, press DBB to turn on or off
dynamic bass enhancement.
If DBB is activated, DBB is displayed.
»
Immerse music over a wider
spot
1
During play, press LIVING SOUND on
the remote control to turn on or off the
sound effect.
If Living Sound is activated,
»
is displayed.
Mute sound
1
During play, press MUTE to mute/unmute
sound.
EN