Philips DVP3340V-17B - Manual (Page 16)

English
16
LANGUAGE
Menu Language
Select a language for the VCR and DVD’s Setup
menu and on-screen display.
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Original – Refers to the original language in
which the disc was recorded.
Other – To select another language, press num-
ber buttons then OK to enter the corresponding 4-
digit number according to the language code list
on page 30. If you enter the wrong language
code, press CLEAR.
DISPLAY
TV Aspect
4:3 – Select when a standard 4:3 TV is connect-
ed.
16:9 – Select when a 16:9 wide TV is connected.
Display Mode
The display Mode setting works only when the TV
Aspect mode is set to “4:3”.
Letterbox – Displays a wide picture with bands
on the upper and lower portions of the screen.
Panscan – Automatically displays the wide pic-
ture on the entire screen and cuts off the portions
that do not fit.
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for con-
nection to a TV or a monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
To Turn ON progressive scan:
Connect component video out of the this unit to the
input of your monitor/television, set your television or
monitor to Component Input.
1. Select “Progressive Scan” on the DISPLAY menu
then press B.
2. Select “On” using the v / V buttons.
3. Pressing OK will set the player to Progressive
scan mode.
TV Output Select
Set the player’s TV Output Select options according
to the TV connection type.
YPbPr – When your TV is connected with the COM-
PONENT VIDEO OUT/PROGRESSIVE SCAN jacks
on the DVD player.
S-VIDEO – When your TV is connected with the S-
VIDEO jack.
LANGUAGE
Menu Language
Original
English
Original
Original
Disc Audio
Disc Subtitle
Disc Menu
Move Select
DISPLAY
TV Aspect
Widescree
16:9
Off
YPbPr
Display Mode
Progressive Scan
TV Output select
Move Select