Panasonic DMC-FZ2PP - Manual (Page 59)

Recording images (advanced)
59
ª To set manually (White set)
Here the white set mode of white balance is
explained.
[Preparation]
• Set the mode dial except for [
]/[ ]/
[ ]. (P25)
1 Press the [MENU] button.
2 Press 3/4 to select [W.BALANCE].
3 Press 1 to set to white set [ ].
Only when setting the white balance again
4 Press 1.
• The message “AIM THE CAMERA AT
A WHITE SURFACE AND PRESS THE
SHUTTER” is displayed.
5 Aim the camera at a sheet of white
paper
1 or similar object so that it
completely fills the frame to white on
the screen and press the shutter
button all the way.
• White balance is set.
6 Press the [MENU] button.
• The menu will disappear.
• When taking a picture with the flash after
setting the white balance manually, the
white balance may not be properly adjusted.
We recommend setting the white balance to
[AUTO] when using the flash.
1,6
5
2,3,4
WHITE SET
A WHITE SURFACE AND
PRESS THE SHUTTER
AIM THE CAMERA AT
CANCEL
4
1600 PICT.SIZE
QUALITY
REC 1/4 SETUP
AE MODE P AE
2,3
W.BALANCE
CANCEL
AUTO
MENU
SELECT SET EXIT MENU
FZ2-PP.book 59 ページ ２００３年９月２６日 金曜日 午後１２時１分