Recording blank sections, 8 recording other sources, 1while recording, or in record-pause mode, press – Pioneer PDR-W839 User Manual
Page 43: 2to finish the recording session here, press 7
43
8 Recording Other Sources
En
Recording blank sections
This feature is useful when you want to put some space at the end
of a recording session so that the next recording doesn't start after
the last too closely, but use it wherever you need some blank space
recorded on the disc. Note that you can’t start a recording with a
muted section; only after the recording has started, or at the end of
a recording.
1
While recording, or in record-pause
mode, press
¶.
The
REC
indicator starts blinking and a blank space of
about four seconds is recorded. The recorder then goes into
record-pause. If you start recording again, a new track is
started.
• If you press and hold
¶,you can record a blank for as long
as you hold down the button.
• Pressing
¶, (without holding) in record-pause mode
records four seconds of silence from the current position.
Use this to create spaces between tracks when recording in
1-track synchro mode, for example.
• It is not possible to record a blank section if the disc was
stopped (not recording) just before you record-paused.
2
To finish the recording session here,
press
7.
• To restart recording, press
6.
3
- COMPACT DISC MULTI CHANGER
COMPACT DISC DIGITAL RECORDER
◊ÛB¿ˆ˘≤/
COMPACT DISC RECORDER / MULTI-CD CHANGER
Legato Link Conversion
CD TEXT
REC/
REC MUTE
¶
6
7