Pioneer PDR-W839 - Manual (Page 21)

21
5 Recording Features
En
Recording individual tracks
Here's how to copy individual tracks from any disc in the changer:
1 Load the CD(s) you want to copy
tracks from in to the CD changer.
You can use any of the three disc trays in the changer.
2 Load a CD-R or CD-RW into the
CD-R tray.
If the disc isn't blank, make sure that there is enough space
on the disc for what you want to record (see Switching the
Display on page 18–19 to check this).
3 Press REC MODE twice.
The display shows TRACK REC.
If you want to switch the copying speed, do so here. The
default is 2x speed. See Changing the recording speed on
page 29 to change it.
4 Press the CD SELECT button for the
disc you want to record.
On the remote, use the three DISC buttons.
3
- COMPACT DISC MULTI CHANGER COMPACT DISC DIGITAL RECORDER
◊ÛB¿ˆ˘≤/ COMPACT DISC RECORDER / MULTI-CD CHANGER
Legato Link Conversion CD TEXT
CD SELECT
START
REC THIS
CD = CD-R
REC MODE
OPEN/CLOSE
1
3
2
1
3
2
OPEN/CLOSE
7
0
0
0
4 1 ¡ ¢
7
0
TIME
DISC 1 DISC 2 DISC 3
7
4 ¢
REC
THIS
5 Use
41 and ¡¢ (CD
changer side) to select the track you
want to record.
On the remote, use the number buttons (or
4 and
¢).
If you want to adjust the digital recording level, do so here.
The default is 0dB. See Setting the recording level on page
29 to adjust it.
6 Press CD
=CD-R START (front panel
only).
The recorder starts copying the track and stops automati-
cally when it's finished.
• If the button is blinking, there’s not enough space on the
disc for what you want to record. Press again to start
recording anyway, or press
7 to cancel.
• If you want to now finalize the disc, turn to page 31.