PYLE Audio PLTVD7IN - Manual (Page 20)

18
BASIC OPERATION
3. Use key and place cursor (Yellow
bar) on the item you want to adjust
(Ex. Tone/ Volume) and press
ENTER key as picture below.
4. Use key and place cursor (Yellow
bar) on the sub-item you want to adjust
(Ex. Bass) and press ENTER key as
picture below
5. Press key to adjust the level of the
selected item as picture below.
6. Press ENTER key at least for 2 seconds
to return to the previous menu.
* When no key is pressed for 5 seconds,
the menu will disappear.
7. Bass /Mid / Treble can be adjusted from
14 level to 14 level.
3. Use key and place cursor (Yellow
bar) on the item you want to adjust (Ex.
Contrast) and press ENTER key as
picture above.
4. Press key to adjust the level of the
selected item as picture below.
5. Press ENTER key at least for 2 seconds
to return to the previous menu.
* When no key is pressed for 5 seconds,
the menu will disappear.
6. Do the same process as above to adjust
Brightness, Color and Tint.
7. Press ENTER key at least for 2 seconds
o n c u r r e n t s c r e e n t o r e t u r n t o t h e
previous screen. Press Menu key about
1 second to turn MENU off directly.
AUDIO CONTROL
1. Press MENU key until the monitor
displays following picture.
2. Use Key and place cursor (Yellow Bar)
on Audio and Press ENTER key.