9 product information, Set the sleep timer, Adjust display brightness – Philips DC350/12 User Manual
Page 21: Specifi cations

22
EN
Press POWER .
The alarm timer remains activated.
Press REPEAT ALARM on the main unit.
The alarm call repeats at 9-minute intervals.
Press ALM 1 or ALM 2 on the main unit.
[AL 1] (alarm 1) or [AL 2] (alarm 2) disappears from the display.
The alarm timer is deactivated.
Set the sleep timer
This DC350 can switch to standby automatically after a set period of time.
1
When the DC350 is turned on, press SLEEP repeatedly to select a set period of
time (in minutes).
When sleep timer is activated, the display shows .
To deactivate sleep timer
1
Press
SLEEP repeatedly until “0” is displayed.
When sleep timer is deactivated, disappears on the display.
Adjust display brightness
1
Press repeatedly BRIGHTNESS CONTROL on the main unit to select:
Bright.
Dim.
Off.
9 Product
information
Note
Product information is subject to change without prior notice.
•
Specifi cations
Amplifi er
Rated Output Power
2X3W RMS
Frequency Response
125Hz - 16kHz, ±3dB
Signal to Noise Ratio
>65dB
Aux Input
0.6 V RMS 10kohm
•
»
•
»
•
»
»
»
»
•
•
•
DC350_12_Book 1.indd 22
DC350_12_Book 1.indd 22
11/7/2008 2:05:27 PM
11/7/2008 2:05:27 PM