8 other features, Set the alarm timer – Philips DC350/12 User Manual
Page 20

English
21
EN
8 Other
features
Set the alarm timer
You can set two alarms which go off at different time.
1
Ensure that you have set the clock correctly. (see ‘Set clock and date’ on page 13 )
2
Press and hold ALM 1 or ALM 2 on the main unit for 2 seconds.
Hour digits blink.
[AL 1] (alarm 1) or [AL 2] (alarm 2) is displayed.
3
Press
/
repeatedly to set the hour.
4
Press
ALM 1 or ALM 2 to confi rm.
5
Press
/
repeatedly to set the minute.
6
Press
ALM 1 or ALM 2 to confi rm.
To set the other alarm, repeat the steps 2 - 6.
Tip
To view alarm time, press ALM 1 or ALM 2 repeatedly until alarm time is displayed.
•
Set alarm mode
1
Adjust the iPhone/iPod-RADIO-BUZZER control on the main unit to select the
source for the alarm.
When the alarm time comes, the selected Phone/iPod, or radio or buzzer
turns on.
Tip
If iPod/iPhone source is selected but no iPod/iPhone is loaded, the buzzer is selected automatically.
•
Activate the alarm timer
1
Press repeatedly ALM 1 or ALM 2 on the main unit to activate or deactivate the
timer.
If the timer is activated, [AL 1] (alarm 1) or [AL 2] (alarm 2) is displayed.
If the timer is deactivated, [AL 1] (alarm 1) or [AL 2] (alarm 2) disappears.
Turn off the alarm tone
During an alarm tone, you can select one of the following to turn it off.
»
»
•
»
»
»
DC350_12_Book 1.indd 21
DC350_12_Book 1.indd 21
11/7/2008 2:05:26 PM
11/7/2008 2:05:26 PM