ParaBody 844 - Manual (Page 11)

STEP 8:
FIGURE 8
• Attach the LAT CABLE (11) to the CARRIAGE (7) using one 1/4” QUICK LINK (34) as shown in FIGURE 8. (IMPORTANT!
Securely tighten QUICK LINK.)
!IMPORTANT!
SECURELY
TIGHTEN
34
7
FIGURE 9
STEP 9:
• Loop the ball end of the LOW ROW CABLE (12) around one 4-1/2” PULLEY (9) and SECURELY assemble the 4-1/2” PULLEY
(9) to the LOW PULLEY HOUSING (8) using two 3/8 X 2-3/4” BOLTS (17), two 3/8” FLANGE SPACERS (22), two 3/8” WASH-
ERS (20), and two 3/8” LOCKNUTS (21). (NOTE: Make sure CABLE is routed between the PULLEY and the retaining bolt
as shown in FIGURE 9.)
11
3/8 X 2-3/4” 17
8
21
23
20
9
0 1 2 3 4 5 6
1/2 1/2 1/2 1/2 1/2 1/2