Panasonic CQ-VD6505W - Manual (Page 68)

15
16 CQ-VD6505W
English
Electrical Connections
(continued)
P
N
D
2
L
REVERSE
R
F U S E 1 5 A F U S E 1 5 A F U S E 1 5 A
8 m m M A X
> P B T < J A M - S A a
CAMERA-IN
Panasonic
Connecting the Reverse Lead
If using an optional rear view camera, the reverse lead must
be connected.
Connect the reverse lead (violet/white stripe) to the positive (+)
lead of the reverse lamp (the lamp with a clear lens that lights
when the transmission gear is shifted into the reverse position).
Note:
¡Connect the reverse lead after cutting the terminal at the end.
¡Use a Reverse Extension Cord
!1 if needed.
Connection with Rear View Camera
Rear View Camera
(CY-RC50KW) (option)
(Video)
(Yellow)
RCA Cord (option)
Rear View Camera
Control Unit (option)
CQ-VD6505W (Rear)
(Video)
(Yellow)
!0 Power Connector
Reverse lamp
Clip connector
(option)
Battery
Car chassis
Transmission gear
!1 Reverse Extension Cord
(Violet/white stripe)
Reverse Lead
(Violet/white stripe)
Camera Input
Camera Input Terminal
(Yellow)
Check the reverse lamp.
Take it out of the back of
the tail lamp mount.
Note:
¡ Refer to the operating instructions for the connected devices, in addition.