Panasonic DMC-FZ5GN - Manual (Page 84)

Playback (advanced)
84
VQT0Q40
This mode allows you to display pictures
recorded by holding the camera vertically
or pictures rotated in [ROTATE] function in
the rotated direction.
1 Select [ON] to set it.
• When you select [OFF], the pictures are
displayed without being rotated.
• Refer to P49 for how to play back
pictures.
• When you take pictures by holding the
camera vertically, read “Tips for taking
good pictures” on P31 carefully.
• The direction detection function (P32)
may not work properly on pictures
recorded by aiming the camera up or
down.
• Only still pictures in normal playback can
be rotated. When playing back rotated
pictures in zoom playback or multi
playback, pictures appear in original
orientation.
• You can rotate and display pictures by
using [ROTATE] function even if you do
not take pictures by holding the camera
vertically.
You can rotate the recorded pictures in
steps of 90° and display them.
∫ Example
When rotating clockwise (
)
Original
picture
1 Select the picture to be rotated
and set it.
• Pictures recorded in motion image
mode [ ] and protected pictures
cannot be rotated.
Displaying pictures in a
direction at the time of
recording
[ROTATE DISP.]
PLAY 1 /
2
SLIDE SHOW
PROTECT
EXIT MENU SELECT
ROTATE
DPOF PRINT
OFF ROTATE DISP.
ON
SET
Rotating the Picture [ROTATE]
EXIT MENU
100_0001
1 / 1 9
ROTATE
SET SELECT
2560
VQT0Q40ENG.book 84 ページ ２００５年２月１６日 水曜日 午後２時４７分