Panasonic DMC-FZ5GN - Manual (Page 19)

Preparation
19
VQT0Q40
Attaching the Lens Hood
In bright sunlight or backlight, the lens hood
will minimise lens flare and ghosting.
The lens hood cuts out excess light and
improves the picture quality.
• Check that the camera is turned off and
that the lens is retracted.
• Close the flash.
1 1 Counter-rotate the 2 halves of
the lens hood adaptor until
marker
A is at [UNLOCK]
position.
2 Place the camera upside down.
Align [UNLOCK] to groove B
on the camera then slide the
lens hood adaptor over the
lens until it stops.
2 Rotate ring C clockwise until
[LOCK] mark is aligned with
marker
A on the adaptor.
• Rotate the ring until it clicks.
3 1 Place the camera right way up.
Align marker D on the lens
hood to marker E on the
adaptor and push the lens
hood onto the adaptor.
2 Rotate the lens hood clockwise
until it stops at marker F.
[UNLOCK]
[LOCK]
VQT0Q40ENG.book 19 ページ ２００５年２月１６日 水曜日 午後２時４７分