Philips VR499/75 - Manual (Page 3)

— 4 —
D
ESCRIPTION OF
C
ONTROLS (C
ONTINUED
)
Remote Control
Using this remote control to
operate TV
For VR299/75:
Some buttons on this remote control
can be used to operate PHILIPS TV.
For VR499/75:
Some buttons on this remote control
can be used not only for PHILIPS TV
but also other manufacturers’ TV.
To operate TV, see page 19.
9 VOL (volume) 5 5 5 5 5 / ∞ ∞ ∞ ∞ ∞ buttons
Changes the TV volume.
Release at desired volume.
For VR299/75, this button functions on
Philips TV only.
10 EXIT/STATUS button
Before using this button, press VCR or
TV to select your target component.
• After pressing VCR :
– Displays the time counter, present
time, channel number, and
remaining tape length. (✈P.14)
– Exits from menu operations when
using the menus. (✈P.9)
• After pressing TV (VR499/75 only):
For some PHILIPS TVs:
– Displays the TV’s on-screen
information.
– Exits from TV’s menu operations
when using the TV’s menus.
For other manufacturers’ TVs:
Functions as the ENTER button if
your TV requires pressing ENTER
after selecting a channel number.
11 SKIP SEARCH button
Skips playback for 30 seconds by time
counter reading.
When pressed more than once up to 4
times, the search time increases in 30-
second intervals up to 2 minutes.
(✈P.13)
12 SMARTPICTURE button
Selects the SmartPicture mode. (✈P.13)
13 TV button
Makes the remote control ready for
operating the TV.
14 VCR button
Makes the remote control ready for
operating the VCR.
15 EJECT 0 button
Ejects the cassette. (✈P.12)
1 CBL/DBS button
Does not function for this model.
2 POWER button
Before using this button, press VCR or
TV to select your target component.
• After pressing VCR :
– Turns the VCR on or off.
– Sets the VCR for an unattended
recording (timer recording) after
timer settings are completed.
(✈P.16, P.17)
• After pressing TV , turns the TV on or
off.
For VR299/75, this button functions on
Philips TV only.
3 VCR/TV button
(For VR499/75 only)
After pressing TV, select the VCR channel
or Auxiliary mode at TV.
4 SPEED button
Selects the tape speed for recording SP,
LP or SLP (For VR499/75 only).
During playback, the tape speed is
automatically selected (SP, LP or SLP).
(✈P.12)
SP, LP : For PAL signal
SP, SLP : For NTSC signal
5 STILL/SLOW – button
During a slow motion picture, adjusts
the playback speed in the reverse
direction. (✈P.14)
Press
PLAY 3 to resume normal
playback.
6 PLAY
3 / 5 button
Before using this button, press VCR or
TV to select your target component.
• After pressing VCR :
– Starts normal playback. (✈P.12)
– Moves up the cursor when using
the menus. (✈P.9)
For some PHILIPS TV (VR499/75
only):
• After pressing
TV , operates the TV’s
menus.
7
1 (Rewind) / 2 button
Before using this button, press VCR or
TV to select your target component.
• After pressing VCR :
– Rewinds the tape. Also, during
playback, starts rapid reverse
visual search. (✈P.12)
– Goes back to the previous menu
screen when using the menus.
(✈P.9)
For some PHILIPS TV (VR499/75
only):
• After pressing TV, operates the TV’s
menus.
8 STOP 7 / ∞ ∞ ∞ ∞ ∞ button
• After pressing VCR :
– Stops the tape. (✈P.12)
– Moves down the cursor when
using the menus. (✈P. 9)
For some PHILIPS TV (VR499/75
only):
• After pressing
TV , operates the TV’s
menus.
VCR TV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
EJECT
CH VOL
EXIT/STATUS
TIMER
SMARTPICTURE
SKIP SEARCH INDEX AUDIO/MUTE
MENU
- +
CBL / DBS
1 2 3
4 5 6
7 8 9
START STOP DATE
DBS DAILY
PLAY
REW FF
STOP
WEEKLY
/OTR REC
-
+
-
+
SPEED 0 CLEAR
............. .............
........ ........
/OK
1
13
14
19
17
15
16
21
20
22
26
25
24
23
18
4
5
7
9
10
11
12
8
6
3
2
VR299/499-75 EN 7/6/99, 3:45 PM 4