Perle Systems PERLE P850 User Manual

Page 63

Applications

TCP mss option should decrease to 1452 bytes. Therefore when

configuring the router for PPPoE, the remote site NAT configuration

automatically adjust its TCP mss option to 1452 to accommodate this

requirement. To verify this value has been adjusted:
Location: Main

Configuration

WAN Set-Up

Remote Site Set-up

Protocol Set-Up

IP Parameters

NAT Advanced Set-up

TCP mss

enabled

TCP mss value

1452

Normally your ISP provider will provide you with an outgoing

username and password and to authenticate with their services. The

PPPoE remote site configuration needs to have the security section

configured with this ISP parameters to authenticate the PPPoE

connection.
Location: Main

Configuration

WAN Set-Up

Remote Site Set-Up

Security Set-Up

Outgoing Username

ISP provided username

Outgoing PAP password

ISP provided password

Outgoing CHAP password (if required by ISP)

ISP chap password