Philips SQM5572/27 - Manual (Page 8)

8
5
If any of the arms become too lose to hold
their position, they can be tightened using the
alley key provided in your hardware kit.
8
8
6
To adjust the tilt position of your display,
have one person hold the display in place while
another person loosens the two tilt adjustment
knobs located on either side of the mount.
Once the knobs are loose, move the display to
the desired angle. Tighten the knobs securely
before releasing the display.
9
9
7
If you find that your display is not level, first
loosen the horizontal adjustment screws located
behind the mount using the allen key provided
in your hardware kit. Carefully level your display
and re-tighten the adjustment screws once you
are satisfied.
10
10
5 Guarantee and service
Please contact Philips directly if you have any
questions in the installation process of the wall
mount. Call 1-919-573-7854.
Limited Two-Year Warranty
Philips warrants that this product shall be free
from defects in material, workmanship and
assembly, under normal use, in accordance with
the specications and warnings, for two years
from the date of your purchase of this product.
This warranty extends only to the original
purchaser of the product, and is not transferable.
To exercise your rights under this warranty, you
must provide proof of purchase in the form of
an original sales receipt that shows the product
name and the date of purchase. For customer
support or to obtain warranty service, please
call 919-573-7854. THERE ARE NO OTHER
EXPRESS OR IMPLIED WARRANTIES. Philips’
liability is limited to repair or, at its sole option,
replacement of the product. Incidental, special
and consequential damages are disclaimed where
permitted by law. This warranty gives you specic
legal rights. You may also have other rights that
vary from state to state.
Register your product and get support at
www.philips.com/welcome.