Panasonic AJ-D700P - Manual (Page 92)

Recording
Successive Shooting
Successive shooting with an accuracy of within ±1 frame can be performed simply by pressing
the VTR START button of the unit or the VTR button of the lens while recording is paused.
While recording is paused
The unit automatically searches for the successive shooting point. However, the time until record-
ing starts differs according to the setting of the VTR SAVE/STBY switch.
If the VTR SAVE/STBY switch is set to SAVE, recording starts about 2 seconds after the VTR
START button is pressed.
If the VTR SAVE/STBY switch is set to STBY, recording starts immediately after the VTR
START button is pressed.
Successive shooting when the power is turned off while recording is paused
2 1
1
Turn the power back on.
2
Press the VTR START button of the unit or the VTR button of the lens to start recording.
- 92 -