Panasonic AJ-D700P - Manual (Page 84)

Setup Card Operations
Writing set data to cards
1
Set the MENU SET/OFF switch to SET. The page on which the previous setting menu opera-
tions were completed appears on the viewfinder screen. (When the menu is used for the first
time, the first page appears.)
2
Press the MENU switch repeatedly until the SET UP CARD page shown below appears.
(This operation can also be performed using the PAGE+UP/DOWN function.)
– SET UP CARD –
READ ( CAM)
WRITE ( CARD)
CARD CONFIG.
ID READ/WRITE :ON
FUNCTION1~2R/W:ON
L/M/H SET R/W :ON
LEVEL 1~6 R/W :ON
3
Press the SHIFT/ITEM button repeatedly to move the cursor to the WRITE ( CARD) posi-
tion.
4
Press the UP (or DOWN) button. When writing is complete, the message shown below ap-
pears.
– SET UP CARD –
READ ( CAM)
WRITE ( CARD)
CARD CONFIG.
ID READ/WRITE :ON
FUNCTION1~2R/W:ON
L/M/H SET R/W :ON
LEVEL 1~6 R/W :ON
WRITE OK
5
When menu operations have been completed, return the MENU SET/OFF switch to OFF.
The setting menu disappears from the viewfinder screen and the displays indicating the unit’s
current status appear at the top and bottom of the viewfinder screen.
- 8 4 -